Description

Bouton poussoir simple à pile

Board : PCB1A version:5.0.1

IO	Desc	GPIO(s)	Feature(s)
POWER_3V[0]	Power supply Battery 3V
PB[0]	Push button	[9]	`Device configuration`
LED[0]	State leds	[20, 22]	`Device configuration`
UART[0]	Serial Interface	[24, 32]
BATT[0]	Battery Level Measurement		`Device configuration`
DC[0]	Dry Contact	[3]
DC[1]	Dry Contact	[28]
LI[0]	Line Input 230V	[5]
AI[0]	Analog Input	[31]
BO[0]	Binary output	[11]
I2C[0]	External I2C	[4, 41]
PB[1]	Push button	[14]
PB[2]	Push button	[17]	`On/Off switch 1` `Dimmer switch 1` `chime-switch 1` `Shutter switch 1` `Ventilation switch 1` `Scenario launcher 1`
PB[3]	Push button	[18]
BATTI[0]	External battery Input
BATTO[0]	Internal battery Output

Sub-models

Entrée(s): [‘PB.2’] , Sortie(s): []

Entrée(s): [‘PB.2’] , Sortie(s): []

Label	Title
function-UI-leds	Indication d’état du produit par LEDs
function-UI-reset-button	Bouton de Reset
function-power-battery	Gestion de pile ou batterie
function-MESH_LPN	Mesh Low Power
function-MESH_PROV	Mesh Provisioning
function-MESH_CONFIG	Mode configuration
function-MESH_UNPROVISION	Mesh Dé-commissioning
function-onoff	Commande On/Off
function-dimmer	Commande variation d’intensité
function-shutter	Gestion des ouvrants
function-chime	Fonction carillon
function-ventilation	Commande VMC PV/GV
function-ventilation-boost	ref-function-ventilation-boost
function-scene	Gestion des scénario
function-maison-vigilante	Maison vigilante

Idx	Feature/IO	Feature	IO
0	`Device configuration`	Gestionnaire de produit	LED[0] PB[0] BATT[0]
1	`On/Off switch 1`	Commande On/Off	PB[2]
2	`Dimmer switch 1`	Commande Variation	PB[2]
3	`chime-switch 1`	Sonnette	PB[2]
4	`Shutter switch 1`	Commande Ouvrants	PB[2]
5	`Ventilation switch 1`	Commande VMC	PB[2]
6	`Scenario launcher 1`	Commande de scénario	PB[2]

Data-model version : 2.32.0.0