Développement
Micromodule 1 sortie de Puissance (On/Off)
Board : SIN version:0
Hardware mapping
IO |
Desc |
GPIO(s) |
Feature(s) |
|---|---|---|---|
POWER_230V[0] |
Power Supply AC 230V - DC 12/3V |
||
PB[0] |
Push button |
[10] |
|
LED[0] |
State leds |
[30, 31] |
|
UART[0] |
Serial Interface |
[2, 5] |
|
LI[0] |
Line Input 230V |
[28] |
|
LI[1] |
Line Input 230V |
[29] |
|
DCO[0] |
Dry Contact Output |
[17] |
|
DCO[1] |
Dry Contact Output |
[3] |
|
PWO[0] |
Pilot Wire Output |
[98] |
|
I2C[0] |
External I2C |
[99] |
Entrée(s): [‘I2C’]
Sortie(s): [‘DCO.0’]
Templates d’entrée
0 : Aucun
1 : Capteur de temperature
switch: none
fonctionnalité: Capteur de température (temperature-sensor)
Templates de sortie
0 : Aucun
1 : On/Off (ampoule)
fonctionnalité: Contrôleur On/Off (ampoule) (onoff-controller/light)
2 : On/Off (prise)
fonctionnalité: Contrôleur On/Off (prise) (onoff-controller/plug)
3 : Chauffe-Eau
fonctionnalité: Contrôle Chauffe-eau (heater-controller/water)
Fonctions
Label |
Title |
|---|---|
function-interfaces-UI-leds |
|
function-interfaces-UI-reset-button |
|
function-power-mains |
|
function-products-health |
|
function-account |
|
function-DFU_product |
|
function-MESH |
|
function-MESH_PROV |
|
function-MESH_UNPROVISION |
|
function-MESH_CONFIG |
|
function-MESH_PROXY |
|
function-MESH_RELAY |
|
function-MESH_FRIEND |
|
function-voice-ctrl |
|
function-scene |
|
function-maison-vigilante |
|
function-thermostat |
|
function-heater |
|
function-offloading |
Fonctionnalités
Idx |
Feature/IO |
Fonctionnalité |
IO |
|---|---|---|---|
0 |
Device configuration |
ref-feature-device-config |
|
1 |
|
DCO[0] |
|
2 |
|
I2C[0] |
|
3 |
Motion detector |
||
4 |
|
DCO[0] |
Data-model version : 2.43.13.0