Hardware
Board : PCB3A version: 9.0.0
IO |
Desc |
GPIO(s) |
Feature(s) |
|---|---|---|---|
POWER_230V[0] |
Power Supply AC 230V - DC 12/3V |
||
PB[0] |
Push button |
[32] |
|
LED[0] |
State leds |
[10, 9] |
|
UART[0] |
Serial Interface |
[40, 41] |
|
LI[0] |
Line Input 230V |
[11] |
|
LI[1] |
Line Input 230V |
[12] |
|
DCO[0] |
Dry Contact Output |
[17] |
|
DCO[1] |
Dry Contact Output |
[14] |
|
EM[0] |
Energy Metering |
[20, 21, 19, 22, 23, 24] |
|
HV[0] |
Bus High Voltage Circuitry |
[3] |
Entrée(s): [‘LI.0’, ‘LI.1’]
Sortie(s): [‘DCO.0’, ‘DCO.1’]
Fonctionnalités
Data-model version : 2.48.1.0
Idx |
Feature/IO |
Fonctionnalité |
IO |
|---|---|---|---|
0 |
Device configuration |
ref-feature-device-config |
|
1 |
On/Off switch 1 |
||
2 |
On/Off switch 2 |
||
3 |
Dimmer switch 1 |
||
4 |
Dimmer switch 2 |
||
5 |
Shutter switch 1 |
||
6 |
Shutter switch 2 |
||
7 |
Ventilation switch 1 |
||
8 |
Ventilation switch 2 |
||
9 |
Chime switch 1 |
||
10 |
Chime switch 2 |
||
11 |
On/Off controller 1 |
||
12 |
On/Off controller 2 |
||
13 |
Shutter controller |
||
14 |
|
DCO[0] DCO[1] |
|
15 |
|
DCO[0] DCO[1] |
|
16 |
ventilation controller |
||
17 |
Energy Metering |
ref-feature-energy-metering |
|
18 |
Motion detector |
||
19 |
Scenario launcher 1 |
||
20 |
Scenario launcher 2 |
||
21 |
heater controller 1 |
||
22 |
heater controller 2 |
Templates d’entrée
0 : Aucun
Templates de sortie
0 : Carillon
fonctionnalité: Carillon (1 sonnerie) (chime-controller)