Feature properties¶

Feature property	Description
feature-enable	Enable a feature
custom-id	Identify a sub version (template_id)
device-rf-tx-power	Set the device RF Tx power (in dBm)
device-rf-modes	Set the device RF modes
device-power-type	Device power type
device-serial-mode	configure the serial interface for ate and co-processor
ble-lgs-disable	Disable BLE LGS protocol
overheat-alert	Device overheat alert detection
overheat-alert-threshold	Device overheat alert threshold
feature-option	Feature option
feature-io	Feature IO instance
switches-detection	Detect and save the switches type
switch-type	Switch action type
onoff-switch-type-compatibility-mode	Bluetooth MESH compatibility mode
output-zero-load-control	Activation de la détection de charge nulle
level-switch-compatibility-mode	Bluetooth MESH compatibility mode
level-switch-variation-mode	Variation mode
level-switch-current-level	Current level of the dimmable switch
level-controller-level-min	Min level of the dimmable controller
level-controller-level-max	Max level of the dimmable controller
level-controller-edge-control	level controller edge control type
level-controller-max-level-calibrate	level max possible when dimmer is calibrate
shutter-switch-direction	Shutter switch direction (up/down)
controller-time-run-on	Time Run On (in msecond)
shutter-controller-auto-recalibration	Shutter controller auto recalibration
shutter-controller-calibration-up	Shutter controller calibration up
shutter-controller-calibration-down	Shutter controller calibration down
shutter-controller-calibration-rotation-acw	Shutter controller calibration rotation acw
shutter-controller-calibration-rotation-cw	Shutter controller calibration rotation cw
shutter-controller-rotation-step	Shutter controller rotation step
shutter-controller-report-timeout	Shutter controller report timeout (1s step)
shutter-controller-pulse-ms	Shutter controller pulse time in ms
shutter-controller-internal-power-supply	Shutter controller internal power supply
ventilation-controller-boost-tempo	ventilation controller boost temporisation (min)
ventilation-level-off	ventilation
ventilation-level-normal	ventilation
ventilation-level-forced	ventilation
motion-detector-luminosity	Motion detector luminosity level
smart-meter-driver-mode	Smart meter driver operating mode
smart-meter-contract-subscribed-power	Contract subscribed apparent power
smart-meter-tariff-contract-name	Tariff contract name as declared by the meter or DSO
smart-meter-tariff-period-raw-code	Raw tariff period code as received from the meter
smart-meter-status-register	Raw meter status register
smart-meter-supply-wiring-mode	Meter supply wiring mode
smart-meter-publish-period	Period for publishing periodic instantaneous measurements
terminate-friendship-lpn	to terminate the LPN friendship
smoke-detector-test	Smoke detector test
onoff-current-state	onoff-current-state
level-current-state	level-current-state
shutter-current-state	shutter-current-state
ventilation-current-state	ventilation-current-state
pilot-wire-current-state	pilot-wire-current-state
sat-hue-current-state	sat-hue-current-state
thermostat-mode	Thermostat mode
temperature-setpoint	Temperature-setpoint
derogation-duration	Thermostat derogation duration
thermostat-hysteresis-temp	Tolérance (température d’hysteresis)
thermostat-no-frost-temp	Temperature Hors gel
thermostat-sensor-address	Choix du Capteur de température
thermostat-buttons-lock	Boutons + / - activé
thermostat-manual-setting-temp	Consigne manuelle maximale
thermostat-running-program	Running-program id
burglar-detection-events	Fonction Maison Vigilante - liste des détections
burglar-action-events	Fonction Maison Dissuasive - liste des actions
burglar-grace-period	Fonction Maison Vigilante - Periode de grâce
wifi-scan	Wifi settings scan operations
wifi-connect	Wifi settings connect operations
wifi-ssid	Wifi settings ssid
wifi-password	Wifi settings password
realm-uuid	The realm Id where the gateway is
shell-register	a register transmited over the shell
co-processor-fw-version	Co-processor FW version
infrared-detection	Detect and save tram infrared

feature-enable¶

Enable a feature

Ce paramètre sert à indiquer qu’une fonctionnalité est active.

Label:feature-enable
Id: 0x0000
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	Feature disabled
1	Feature enabled

custom-id¶

Identify a sub version (template_id)

Label:custom-id
Id: 0x0001
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_MODE_NO_HARD_INIT
Adjustable: False
Unité:

Values (int)	Description
0	Default template

device-rf-tx-power¶

Set the device RF Tx power (in dBm)

Label:device-rf-tx-power
Id: 0x0002
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	0DBM
2	POS2DBM
3	POS3DBM
4	POS4DBM
5	POS5DBM
6	POS6DBM
7	POS7DBM
8	POS8DBM

device-rf-modes¶

Set the device RF modes

Label:device-rf-modes
Id: 0x0003
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	BLE 1Mbits
1	BLE 2Mbits
2	NRF_62K5BIT Long Range
3	RADIO_END
4	SIG BLE Long Range

device-power-type¶

Device power type

Label:device-power-type
Id: 0x000A
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	Energy harvesting powered
1	Battery powered
2	230V powered

device-serial-mode¶

configure the serial interface for ate and co-processor

Label:device-serial-mode
Id: 0x0010
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	serial for ate enabled
1	serial for co-processor
2	serial disabled

ble-lgs-disable¶

Disable BLE LGS protocol

Label:ble-lgs-disable
Id: 0x0011
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	Enable LGS
1	Disable LGS

overheat-alert¶

Device overheat alert detection

Cette FP stocke l’état de l’alerte d’échauffement en cours : disabled = pas d’alerte, activated = alerte en cours

Label:overheat-alert
Id: 0x0020
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	Disabled
1	Activated

overheat-alert-threshold¶

Device overheat alert threshold

Label:overheat-alert-threshold
Id: 0x0021
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: centidegree

Values (int)	Description
5000	default
5000	default
6000	default
7000	default
8500	default

feature-option¶

Feature option

Label:feature-option
Id: 0x00FD
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	default

feature-io¶

Feature IO instance

Label:feature-io
Id: 0x00FE
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	default
1	in-out-1
2	in-out-2
3	in-out-3

switches-detection¶

Detect and save the switches type

Label:switches-detection
Id: 0x00FF
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: True
Unité:

Values (int)	Description
0	no detection

switch-type¶

Switch action type

Label:switch-type
Id: 0x0100
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: True
Unité:

Values (enum)	Description
0	Undefined
1	Single Push NO
2	Single Push NC
3	Two ways

onoff-switch-type-compatibility-mode¶

Bluetooth MESH compatibility mode

Label:onoff-switch-type-compatibility-mode
Id: 0x0101
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	BLE MESH Proprietary mode (toggle)
1	BLE MESH SIG Mode (onoff)

output-zero-load-control¶

Activation de la détection de charge nulle

Si la FP est enabled, la feature mesure la consommation instantanée C toutes les 10s et déclenche l’alerte de charge nulle si C<2W.

Label:output-zero-load-control
Id: 0x0103
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	Disable
1	Enable

level-switch-compatibility-mode¶

Bluetooth MESH compatibility mode

Label:level-switch-compatibility-mode
Id: 0x0111
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	BLE MESH Proprietary mode
1	BLE MESH SIG Mode

level-switch-variation-mode¶

Variation mode

Label:level-switch-variation-mode
Id: 0x0112
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: True
Unité:

Values (enum)	Description
0	Default mode
1	No double push option
2	Night light mode

level-switch-current-level¶

Current level of the dimmable switch

Label:level-switch-current-level
Id: 0x0113
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	min level
100	max level

level-controller-level-min¶

Min level of the dimmable controller

Label:level-controller-level-min
Id: 0x0114
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	level min
25	default level min

level-controller-level-max¶

Max level of the dimmable controller

Label:level-controller-level-max
Id: 0x0115
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
100	level max
75	default level max

level-controller-edge-control¶

level controller edge control type

Label:level-controller-edge-control
Id: 0x0116
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (enum)	Description
0	leading edge control
1	trailing edge control

level-controller-max-level-calibrate¶

level max possible when dimmer is calibrate

Label:level-controller-max-level-calibrate
Id: 0x0117
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	not calibrate

shutter-switch-direction¶

Shutter switch direction (up/down)

Label:shutter-switch-direction
Id: 0x0152
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (enum)	Description
0	up
1	down

controller-time-run-on¶

Time Run On (in msecond)

Label:controller-time-run-on
Id: 0x8100
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	timer-disabled

shutter-controller-auto-recalibration¶

Shutter controller auto recalibration

Label:shutter-controller-auto-recalibration
Id: 0x8150
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (enum)	Description
0	Auto recalibration disabled
1	Auto recalibration enabled

shutter-controller-calibration-up¶

Shutter controller calibration up

Label:shutter-controller-calibration-up
Id: 0x8151
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	Calibration min
65535	Calibration max

shutter-controller-calibration-down¶

Shutter controller calibration down

Label:shutter-controller-calibration-down
Id: 0x8152
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	Calibration min
65535	Calibration max

shutter-controller-calibration-rotation-acw¶

Shutter controller calibration rotation acw

Label:shutter-controller-calibration-rotation-acw
Id: 0x8155
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	Calibration min
65535	Calibration max

shutter-controller-calibration-rotation-cw¶

Shutter controller calibration rotation cw

Label:shutter-controller-calibration-rotation-cw
Id: 0x8156
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	Calibration min
65535	Calibration max

shutter-controller-rotation-step¶

Shutter controller rotation step

Label:shutter-controller-rotation-step
Id: 0x8157
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	rotation step min
10	rotation step min
90	rotation step max

shutter-controller-report-timeout¶

Shutter controller report timeout (1s step)

Label:shutter-controller-report-timeout
Id: 0x8158
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	Timeout min
72000	Timeout max

shutter-controller-pulse-ms¶

Shutter controller pulse time in ms

Label:shutter-controller-pulse-ms
Id: 0x8159
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
50	pulse min
4000	pulse max
300	Default pulse

shutter-controller-internal-power-supply¶

Shutter controller internal power supply

Label:shutter-controller-internal-power-supply
Id: 0x8160
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (enum)	Description
0	No internal power supply available
1	Internal power supply available

ventilation-controller-boost-tempo¶

ventilation controller boost temporisation (min)

Label:ventilation-controller-boost-tempo
Id: 0x0162
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (int)	Description
0	Timeout min
30	Default Timeout
255	Timeout max

ventilation-level-off¶

ventilation

Label:ventilation-level-off
Id: 0x0170
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
104	default

ventilation-level-normal¶

ventilation

Label:ventilation-level-normal
Id: 0x0171
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
207	default

ventilation-level-forced¶

ventilation

Label:ventilation-level-forced
Id: 0x0172
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	default

motion-detector-luminosity¶

Motion detector luminosity level

Label:motion-detector-luminosity
Id: 0x0202
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
0	default

smart-meter-driver-mode¶

Smart meter driver operating mode

EN:: Indicates which low-level metering driver mode is used (e.g. legacy / standard teleinfo for Linky, or another country-specific mode). This parameter is mostly intended for debugging and advanced support.
FR:: Indique quel mode de driver bas-niveau est utilisé pour le compteur (par exemple téléinfo historique / standard pour Linky, ou tout autre mode spécifique à un pays). Ce paramètre est principalement destiné au debug et au support avancé.

Label:smart-meter-driver-mode
Id: 0x0220
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (enum)	Description
0	Mode téléinfo historique
1	Mode téléinfo standard
2	Autre mode de driver compteur intelligent

smart-meter-contract-subscribed-power¶

Contract subscribed apparent power

Puissance apparente souscrite au contrat d’alimentation électrique. Pour les compteurs Linky français, cette valeur est dérivée d’ISOUSC (TIC historique) ou directement lue dans PREF (TIC standard) et est exprimée en kVA.

Label:smart-meter-contract-subscribed-power
Id: 0x0221
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (int)	Description
0	default

smart-meter-tariff-contract-name¶

Tariff contract name as declared by the meter or DSO

Nom ou code brut de l’offre tarifaire, tel qu’exposé par le compteur. Pour les compteurs Linky français, cette information provient de OPTARIF (TIC historique) ou NGTF (TIC standard). Cette valeur est spécifique au pays et au fournisseur (HP/HC, Tempo, etc.).

Label:smart-meter-tariff-contract-name
Id: 0x0222
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (string)	Description
0	default

smart-meter-tariff-period-raw-code¶

Raw tariff period code as received from the meter

Code brut représentant la période tarifaire en cours, directement mappé depuis le protocole du compteur. Pour les compteurs Linky français, il s’agit de PTEC (TIC historique) ou LTARF (TIC standard). Les abstractions tarifaires de plus haut niveau sont construites à partir de cette information.

Label:smart-meter-tariff-period-raw-code
Id: 0x0223
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (string)	Description
0	default

smart-meter-status-register¶

Raw meter status register

Registre de statut brut lu directement sur le compteur. Cette valeur est interprétée par le driver spécifique au pays pour en déduire des indicateurs de statut de plus haut niveau (par exemple commande tarifaire, surcharge, mode production).

Label:smart-meter-status-register
Id: 0x0224
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (int)	Description
0	default

smart-meter-supply-wiring-mode¶

Meter supply wiring mode

Indique si le compteur et l’installation électrique sont configurés en monophasé ou en triphasé.

Label:smart-meter-supply-wiring-mode
Id: 0x0225
Access Mode: FP_ACCESS_MESH_R|FP_ACCESS_MESH_RAM_ONLY
Adjustable: False
Unité:

Values (enum)	Description
0	Alimentation monophasée
1	Alimentation triphasée

smart-meter-publish-period¶

Period for publishing periodic instantaneous measurements

Définit la période, en millisecondes, utilisée pour publier les mesures instantanées du compteur sur le réseau Mesh de manière périodique.

Label:smart-meter-publish-period
Id: 0x0226
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (int)	Description
10000	default

terminate-friendship-lpn¶

to terminate the LPN friendship

Label:terminate-friendship-lpn
Id: 0x0300
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (enum)	Description
0	terminate friendship

smoke-detector-test¶

Smoke detector test

Label:smoke-detector-test
Id: 0x0400
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: True
Unité:

Values (enum)	Description
0	test inactive on Smoke detector (no Alarm)
1	test active on Smoke detector (Alarm)

onoff-current-state¶

onoff-current-state

Label:onoff-current-state
Id: 0xA000
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	default

level-current-state¶

level-current-state

Label:level-current-state
Id: 0xA001
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
65536	default

shutter-current-state¶

shutter-current-state

Label:shutter-current-state
Id: 0xA002
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	default

ventilation-current-state¶

ventilation-current-state

Label:ventilation-current-state
Id: 0xA003
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
1	default

pilot-wire-current-state¶

pilot-wire-current-state

Label:pilot-wire-current-state
Id: 0xA004
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	default

sat-hue-current-state¶

sat-hue-current-state

Label:sat-hue-current-state
Id: 0xA005
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	default

thermostat-mode¶

Thermostat mode

Label:thermostat-mode
Id: 0xA020
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
0	default

temperature-setpoint¶

Temperature-setpoint

Label:temperature-setpoint
Id: 0xA021
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (int)	Description
2000	default

derogation-duration¶

Thermostat derogation duration

Label:derogation-duration
Id: 0xA022
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: minute

Values (int)	Description
0	Timeout min
180	Default Timeout
1440	Timeout max

thermostat-hysteresis-temp¶

Tolérance (température d’hysteresis)

C’est la différence acceptable entre la température de consigne et la température relevée au delà de laquelle il est nécessaire de déclencher la chauffe Min 0,1°C, max 2,0°C. Valeur par défaut 0,5°C

Label:thermostat-hysteresis-temp
Id: 0xA023
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: decidegree

Values (int)	Description
50	min
50	default
200	max

thermostat-no-frost-temp¶

Temperature Hors gel

C’est la température cible lorsque le mode de fonctionnement hors gel est activé. Ce paramètre n’est défini que pour les thermostats à consigne en température. 7° par défaut.

Label:thermostat-no-frost-temp
Id: 0xA024
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: decidegree

Values (int)	Description
500	min
700	default
1500	max

thermostat-sensor-address¶

Choix du Capteur de température

Par défaut « lui-même» . On stockera ds une FP l’adresse source du capteur à écouter (le thermostat souscrira à C000 et verra “passer” tous les capteurs)

Label:thermostat-sensor-address
Id: 0xA025
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: address

Values (int)	Description
0	default

thermostat-buttons-lock¶

Boutons + / - activé

Ce paramètre indique si les boutons + / - permettent de changer la température en mode de fonctionnement manuel ou de faire une dérogation en mode de fonctionnement programme. Cela permet de limiter l’usage du boitier mural dans le cas d’utilisation dans un lieu public

Label:thermostat-buttons-lock
Id: 0xA026
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (enum)	Description
0	Disable
1	Enable

thermostat-manual-setting-temp¶

Consigne manuelle maximale

Ce paramètre définit la température de consigne maximum pour le mode de fonctionnement manuel ou pour une dérogation. Ce paramètre n’est défini que pour les thermostats à consigne en température.

Label:thermostat-manual-setting-temp
Id: 0xA027
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: decidegree

Values (int)	Description
750	min
2500	default
3000	max

thermostat-running-program¶

Running-program id

Thermostat : prog_id du programme en cours (0 si pas de prog)

Label:thermostat-running-program
Id: 0xA028
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité: id

Values (int)	Description
0	default

burglar-detection-events¶

Fonction Maison Vigilante - liste des détections

Bit 0: Me notifier en cas de detection de mouvement (true par défaut)
Bit 1: Me notifier en cas de changement de statut sur un produit (true par défaut)
Label:burglar-detection-events
Id: 0xA030
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: bitfields

Values (int)	Description
0	min
3	Default
3	max

burglar-action-events¶

Fonction Maison Dissuasive - liste des actions

Bit 0: Faire sonner les détecteurs de fumée (off par défaut)
Bit 1: Fermer les volets (off par défaut)
Bit 2: Allumer les lumières (off par défaut)
Label:burglar-action-events
Id: 0xA031
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: bitfields

Values (int)	Description
0	min
0	Default
7	max

burglar-grace-period¶

Fonction Maison Vigilante - Periode de grâce

La période de grâce permet à l’utilisateur :

d’avoir un délai au départ du logement : à l’activation de la maison vigilante la période de grâce permet de sortir du logement en passant devant un capteur ou en éteignant une lumière sans déclencher une alerte. L’activation est effective au delà de la période de grâce.
d’avoir un délai à l’arrivée dans le logement : à la détection (je passe devant le capteur de mouvement par exemple) j’ai la durée de la période de grâce pour désactiver la maison vigilante avant le déclenchement de l’alerte (envoi d’une notification).
Label:burglar-grace-period
Id: 0xA032
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité: second

Values (int)	Description
1	min
30	Default
120	max

wifi-scan¶

Wifi settings scan operations

Label:wifi-scan
Id: 0xB000
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

wifi-connect¶

Wifi settings connect operations

Label:wifi-connect
Id: 0xB001
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

wifi-ssid¶

Wifi settings ssid

Label:wifi-ssid
Id: 0xB002
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

wifi-password¶

Wifi settings password

Label:wifi-password
Id: 0xB003
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

realm-uuid¶

The realm Id where the gateway is

Label:realm-uuid
Id: 0xB010
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

shell-register¶

a register transmited over the shell

Label:shell-register
Id: 0xB011
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W (internal)
Adjustable: False
Unité:

Values (array)	Description
0	default

co-processor-fw-version¶

Co-processor FW version

Label:co-processor-fw-version
Id: 0xF000
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W
Adjustable: False
Unité:

Values (array)	Description
0	default

infrared-detection¶

Detect and save tram infrared

Label:infrared-detection
Id: 0x0500
Access Mode: FP_ACCESS_SERIAL_R|FP_ACCESS_SERIAL_W|FP_ACCESS_MESH_R|FP_ACCESS_MESH_W|FP_MODE_NO_HARD_INIT (internal)
Adjustable: True
Unité:

Values (int)	Description
0	default

Revision date : 28 mai 2026